Laser & Survey Solutions
Laser & Survey Solutions

 

SET Series 30R


The Series 30R's extremely narrow, visible, red laser truly sets it apart. With its small diameter, the laser pinpoints and accurately measures difficult positions such as small objects, edges of walls, or targets located at a steep angle

Features
  • High-precision reflectorless distance measuring with a narrow visible layer
  • Ability to measure through obstacles such as chain-link fences and trees
  • Compatibility with prisms for long-range measurements
  • Superior performance in tough environments
    New advances with RED-tech EDM

Sokkia's revolutionary digital signal processing technology, RED-tech, relies on a unique procedure for measurement beam analysis. This innovative digital signal processing technology maximises the speed and precision of reflectorless distance measurement. Using an A/D converter, it simultaneously samples measuring signals in three different frequencies, furthermore, RED-tech uses advanced software to calculate distances. As a result, RED-tech ensures that the calculation method most suited to the condition of the measuring beam is selected. It also is able to deliver greater accuracy, speed, and range.

Ultra-wide reflectorless measurement range

From extra-lon distances to remarkably short ones, the Series 30R offers accurate reflectorless measurement over a tremendous range of distances. The Series 30R total stations feature a Class 3R laser, and cover a range of 0.3m (1 ft. to 1,140 ft.). Models equipped with a Class 2 laser are also available. These have a reach of up to 150m (490ft.) or 100m (320ft.).

 

Telescope Fully transmitting, Coaxial sighting and distance measuring optics.
Magnification

SET330R/SET530R - 30x   SET630R - 26x

Resolving power

SET330R/SET530R - 3"   SET630R - 3.5"

Field of view

1°30" (26m/1,000m)

Minimum focus

1.3m (4.3ft)

Angle measurement Photoelectrical absolute rotary encoder scanning. Both circles adopt diametrical detection.
Unit H&V

Degree / Gon / Mil, selectable

Display resolutions H&V

1 / 5", 0.2mgon/1mgon, 0.005 mil, selectable

Accuracy (ISO12857-2 1997) H&V

SET330R - 3" (1mgon)   SET530R - 5" (1.5mgon)   SET630R - 6" (1.9mgon)

Measurement mode

H:Clockwise / Counterclockwise, 0 set, Hold, angle setting, repetition V:Zenith 0°, Horizontal 0° ±90°, slope in %

Automatic dual-axis-compensator

Range: ±3' (±55mgon), "out-of-range " warning display provided

Distance measurement Modulated near infrared LASER, Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class 2, FDA Class ll LASER)
Maximum measuring range

A: Average conditions: slight haze, visibility about 20km (12miles), sunny periods, weak scintillation. B: Good conditions: no haze, visibility about 40km (25miles), overcast, no scintillation.

Reflectorless *1A

SET230R/SET330R/SET530R - 150m (490ft.)    SET630R - 100m (320ft.)

With reflective sheet A

500m (1,640 ft.)

With one AP01 prism G

SET230R/SET330R/SET530R - 5,000m (16,400 ft.)   SET630R - 4,000m (13,000 ft.)

Unit

Meters / Feet / Inch, selectable

Display resolution

0.001m (0.01 ft. / 1/8 inch)

Accuracy
Reflectorless *1

±(3 + 2ppm x D)mm

With reflective sheet

±(3 + 2ppm x D)mm

With AP prism

±(2 + 2ppm x D)mm

Measuring time

Every 1.3s (initial meas. 2.6 s)

Measurement mode

Fine meas. (single/repeat/average) / Tracking

Laser

Wavelength: 635 - 690 nm, Max. output:0.99mW

Data storage and transfer
Internal memory

About 10,000 points

Memory card unit*2

SET330R/SET530R - Optional   SET630R - -

Scale factor setting

0.5 to 2.0

Interface

Asynchronous serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps

Printer output

Centronics compatible (w/ optional DOC46 printer cable)

General
Laser-pointer function

ON (automatic off 5 minutes after operation) / OFF, selectable

Display type

Alphanumeric/graphic dot matrix LCD (192x80 dots)

Keyboard (15keys)

SET330R/SET530R - On both faces   SET630R - On one face

Wireless keyboard

SET330R/SET530R - Optional   SET630R - -

Sensitivity of levels

 
Plate level

SET330R/SET530R - 30" / 2mm   SET630R - 40" / 2mm

Circular level

10' / 2mm

Graphic LCD level

SET330R - 3' outer circle   SET530R/SET630R - -

Optical plummet

Image: Erect, Magnification: 3x, Minimum focus: 0.3m (0.98 ft.)

Water and dust resistance

Conformity to class IP66 (IEC60529)

Operating temperature

-20°C to +50°C C (-4°F to +122° F)

Tilting / Trunnion axis height

236 mm (9.3 in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish.

Size with handle and battery

W 165xD 170x H 341 mm (W 6.5 x D 6.7 x H 13.5 in.)

Weight with handle and battery

5.3kg (11.7lb.)

Power supply - Operating voltage: 7.2 V DC
BDC46A detachable battery

Li-lon rechargeable battery

Continuous use*3

About 5 hours (About 600points)

Recharging time

Less than 2 hours with CDC61/62/64

Battery level display

4 steps with warning message

Automatic power cut-off

30 / 15 / 10 / 5 minutes after operation / OFF, selectable

Resume function

ON / OFF selectable (backed up for about 1 week)

Ordering Information
6440-22

SET230R 2" Reflectorless Electronic Total Station

6440-23

SET330R 3" Reflectorless Electronic Total Station

6440-25

SET530R 5" Reflectorless Electronic Total Station

6440-26

SET630R 6" Reflectorless Electronic Total Station

All Supplied with: 2 ea. BDC46A Battery (SET630R 1 ea.), CDC62 Quick Charger, CP7 Tubular Compass, Sunshade, Lens Cap, Plumb Bob, Tool Kit, Operator's Manual, Carrying Case
Accessories
6441-14

SF14 Wireless Keyboard for SET230R, SET330R and SET530R

7380-46

BDC46A Lithium Ion Battery

7380-82

CDC62 Quick Charger for BDC46A 110VAC, Flat Prongs

6350-32

Cable from SET/NET to 25 Pin Serial Port (DOC26)

6350-33

Cable from SET/NET to 9 Pin Serial Port (DOC27)

7329-32

EL6 30x Eyepiece for SET630R Only

7311-23

DE25 Zenith Eyepiece

7329-51

OF3A Solar Filter (Flip-Up Type)

6460-01

Power Cable for SET/NET 12VDC to 6VDC w/Clips

2.5mb

[BACK]

 

Copyright © 2008 Laser & Survey Solutions All Rights Reserved.