Dual-axis
compensator
The
DT210/DT510 automatically compensate both Vertical and Horizontal
angles by monitoring the tilt of the instrument in X&Y two directions
Long-life
laser diode
By employing a
laser diode instead of an H-Ne laser tube, the telescope has been
made compact and fully transmitting.
Sharp beam
- round spot
Breakthrough technology
has achieved a laser beam spot extremely close to a perfect circle.
One-touch
switching focused beam / parallel beam
Focused
beam - beam spot becomes smallest at the focused position. Parallel
beam- as the diameter remains constant over any distance, the parallel
beam is convenient for direction control during excavation. With
the LDT50, a parallel beam can be emitted without the need of accessories
by simply adjusting the focusing ring to the parallel beam mark,
resulting in a bright circular beam reaching up to 200 meters (656
feet).
Laser range
over 400 meters
The
laser output power can be set to either 1.W or 2.5mW as required.
The instrument employs a safe Class 3A laser so there is no need
for special safety precautions during use. Angle Measurement Accuracy
(DIN18723) 5" Display Resolution 1" / 5" (0.2 mgon / 1 mgon), selectable
Laser Range Output power 1mW Over 656 ft. (200m) Output power 2.5mW
Over 1,312 ft. (400m) Light source / wavelength Laser diode / 635
nm Laser beam focusing Coincides with telescope focusing. Parallel
beam when the focusing ring is adjusted to the mark. Telescope Image
Erect Magnification 30x Resolving Power 3"